Fine tuning for the Doorsequencer! Mode 1, Mode 2, Mode 3

  • If you need to readjust the timing for the sequence, you can see here how the Setup Assistant builts up the TASKS:


    Mode 1:


    Direction: DOWN- > UP (Retract landing gear)


    Task 4...........switch valve
    Task 1...........close right door
    Task 2...........close left door
    Task 3...........close 1. front door
    Task 5...........close 2. front door



    Direction: UP- > DOWN (Extend landing gear)


    Task 1...........open right door
    Task 2...........open left door
    Task 3...........open 1. front door
    Task 5...........open 2. front door
    Task 4...........switch valve




    Example:


    The front door closes to fast and the landing gear is not up yet: To make the front door starting later, you have to do following changes


    DOWN - > UP
    TASK: 3
    START_TIME: 6.0s (Standard 4.0s)
    STOP_TIME: 8.0s (Standard 6.0s)


    The front door will start 2.0 seconds later to close.


    Warning: Do not change the STARTPOS or STOPPOS!

  • If you need to readjust the timing for the sequence, you can see here how the Setup Assistant builts up the TASKS:


    Mode 2:


    Direction: DOWN- > UP (Retract landing gear)


    Task 1...........open right door
    Task 2...........open left door
    Task 4...........switch valve
    Task 3...........close 1. front door
    Task 7...........close 2. front door
    Task 5...........close right door
    Task 6...........close left door




    Direction: UP- > DOWN (Extend landing gear)


    Task 1...........open right door
    Task 2...........open left door
    Task 3...........open 1. front door
    Task 7...........open 2. front door
    Task 4...........switch valve
    Task 5...........close right door
    Task 6...........close left door




    Example:


    The left and right doors closes to fast when retracting and the landing gear is not up yet: To make the doors starting later, you have to do following changes


    DOWN - > UP
    TASK: 5
    START_TIME: 11.0s (Standard 8.0s)
    STOP_TIME: 14.0s (Standard 11.0s)


    DOWN - > UP
    TASK: 6
    START_TIME: 11.0s (Standard 8.0s)
    STOP_TIME: 14.0s (Standard 11.0s)


    Both doors will start 3.0 seconds later to close.


    Warning: Do not change the STARTPOS or STOPPOS!

  • If you need to readjust the timing for the sequence, you can see here how the Setup Assistant builts up the TASKS:


    Mode 3:

    Direction: DOWN- > UP (Retract landing gear)


    Task 1...........open right door
    Task 2...........open left door
    Task 3...........open 1. front door
    Task 8...........open 2. front door
    Task 4...........switch valve
    Task 5...........close right door
    Task 6...........close left door
    Task 7...........close 1. front door
    Task 9...........close 2. front door





    Direction: UP- > DOWN (Extend landing gear)


    Task 1...........open right door
    Task 2...........open left door
    Task 3...........open 1. front door
    Task 7...........open 2. front door
    Task 4...........switch valve
    Task 5...........close right door
    Task 6...........close left door
    Task 7...........close 1. front door
    Task 9...........close 2. front door



    Example:


    The left and right doors closes to fast when retracting and the landing gear is not up yet: To make the doors starting later, you have to do following changes


    DOWN - > UP
    TASK: 5
    START_TIME: 11.0s (Standard 8.0s)
    STOP_TIME: 14.0s (Standard 11.0s)


    DOWN - > UP
    TASK: 6
    START_TIME: 11.0s (Standard 8.0s)
    STOP_TIME: 14.0s (Standard 11.0s)


    Both doors will start 3.0 seconds later to close.


    Warning: Do not change the STARTPOS or STOPPOS!