I purchased a new Spark Switch from Horizon Hobby. I installed it per the instruction manual but it does not work. I've adjusted the endpoints for the ignition switch on my Jeti DS-16 radio from 0% to 100% and vice versa still without any luck. Just thought I would check here one last time before sending it back to Horizon.
the SparkSwitches are well tested before delivery and are very reliable. So I can´t imagine that the switch has a fault. Can you please make a photo of the wires connected to that?
This website says that the cell phone picture I took is too large for upload and i have no way to reduce the .png image size.
I scaled up the allowed picture size. I´ll kindly ask you to try again.