Setup JR DMSS X-BUS

  • Hello,


    This is a step by step manual how to setup two JR X-Bus receivers for use with SRS products.
    Actually there are different receivers with the X-BUS feature: RG031BX or RG731IBX or RG812X or RG712BX.


    - Connect the Binding plug to receiver 1 and power it up.
    - Go into the "SYSTEM LIST" menu of the transmitter and select "BIND & RANGE"
    - Select "BIND" and wait until the LED´s are solid green
    - Goto "X-BUS" menu, select BUS TYPE "MODE.A"


    If using only one receiver, you are done now. To get a dual receiver setup, go on:


    - Disconnect receiver 1
    - Connect the Binding plug to receiver 2 and power it up.
    - Go into the "SYSTEM LIST" menu of the transmitter and select "BIND & RANGE"
    - Select "BIND" and wait until the LED´s are solid green
    - Goto "X-BUS" menu, select BUS TYPE "MODE.A"
    - Disconnect this receiver


    Both receivers are connected to the transmitter, and the X-BUS is activated.