It is 19 files, but my files size is 20.2MB.
Found it under Functions -> Trim -> Signal -> Beep
Please kindly inform me how to active Trim Sound.
For now, I can only find a setting page on Settings -> Audio, which is defauted for all 100% and buttonsound on.
I've successfully updated my core to the latest version. However, I found that my trims and buttons still do not have any sounds.
As there are 2 sound files included in this update, I'm thinking why I can not get any sound except timmer alarm sound.
Please help me to get sounds of trim and buttons.
Attached please find my sound settings image and a zip file of video recording.
thank you, all problem well solved.
Also, please note that, in picture 1 and 2, all of my Core data not show too.
Actually, I've always powered my receiver on.
When icons onthe top right shows no signal, I can actually control my servos! (what a strainge thing)
After several times of reboot, now it has signals, but all of my telemetry data still has a triangle with an exclamation mark...
Does triangle with an exclamation mark normal?
My wedgets doesn't display any telemetry information...
It only has a triangle with a exclamation mark.
Still, please consider to add EXP2 to the setting page.
Use 5 or 7 points to get curves like EXP2 is sooo inconvinient.
This is Ming from China. I've received my Core transmitter today and found it is well designed.
However, when I try to set my models, I found the EXP setting of Core may need a software update to handle the following situation:
In futaba 18sz, I can use 2 kinds of EXP curves, which are EXP1 and EXP2. Please see my attachments for pictures of 35% EXP1 and 30% EXP2.
In my case, I need to use a switch to get 2 kinds of throttle curves: switch on = a straight line, switch off = 30% EXP2.
Because Core only have EXP1, I can only use Curve Editor to set 5 points (smooth mode) to get the curve like EXP2 that I want.
However, because the Core can only assign switches to control Rate and Expo, I can not use a switch to get the 2 conditions: switch on = a straight line, switch off = 30% EXP2.
Thus, I need a function to assign a switch to control the curve editor too.
As fly condition is comming soon, this problem may be solved very soon.
However, I still wishes if you could consider to adjust the curve editting page, to add EXP2 in addition to EXP1.
Hope you may understand what I'm saying because my English is poor.
With best regards,
Glad to know this very good news.
Then, the only problem is the Interlink USB key.
Because Real Flight simulator uses a special USB Key called Interlink to connect a radio to PC, please let me know how to connect your 5ch receiver to the Interlink.
It's a good way to make Core radio a wireless simulator controller.
Dear Richard, Please kindly inform if I could use Core transmitter to a modern simulator such as Real Flight 8. It’s important for 3D airplane pilots to use exactly the same transmitter at home while flying in a simulator. Best, Ming
Great to know this good news.
thank u so much.
Thank you very much for answering.
Do you think Futaba External Voltage Sensor SBS-01V works or not?
Following is info of this sensor.
Measures: receiver battery voltage and the voltage of a second battery or power supply.
External Line Range: 0-~100V
Normal Line Range: 3.5-~8.4V
Dear support team,
I'm switching from Futaba to Core radio.
I understand that PBR-9D has battery and signal quality telemetry. However, I wander to get both receiver battery voltage and external battery voltage at the same time, just like what Futaba 7008sb receiver can do.
Because I'm flying 3D electric planes, my external batteries are 6s - 12s lipo packages.
Please let me know if there is a way.
btw, can I use sbus2 telemetry sensors?