New question for you
I need to put some diff on my mirage 2000,
Must I do it from the radio, or change the end courses in gyro? Or PowerBox.
I prefer to do it in the radio. ;-))
ok cool thanks
but how can i do to make it without the assitant, where did i do a mistake?
ok i just start the assitant and now every is working, realy i don't understand why...
must i always do the assitant far that?
of course i put delta mix,
besides, if I plug the servo directly into the gyro, everything works fine.
it does not work anymore when we intercalate the PB between the gyro and servos box.
My friend has exactly the same config with a T12fg. He try to do the same and it's not working too.
Which setting my I check?
I don't need to go to the basic setting because all the trouble are coming before I could set anything.
I made a reset on the PB and on the gyro. Always the same.
Version is V16 PB and gyro
I have T18. Futaba.
I made simple airplane only 2 servos, with no mixing on the transmitter, aileron channel 1 and elevator channel 2.
On the PB. Mapping is A : 1 and B : 2
On the gyro mapping is. 1 - aileron A and 2 - elevator A
So it seems ok for me.?
I have a problem with delta mix
It's working well when I connect directly the 2 servos in igyro on elevator A and aileron A.
But when I connect the gyro on the competition srs with the 2 servos on A and B exit of the box with keeping the delta mix on, in the igyro, the mixing is not working anymore and one servo is working only as elevator and the other only as aileron.
Another problem, when we are in flv assistant, at the page "set flight mode switch to fm2 or 3" the igyro is blocked the only way to exit is to disconnect the battery.
Have you got an english manual for the V16 update?
When we are in the set up assistant page, nothing happens when we press ok button on the move slider or knob to teach gain channel page.
Can you help me?