SR2 Battery 2 issue

  • Help!!!


    If I have 1 battery to connected to Battery, I experience the following behavior:


    - Switch: Select power, tap button “I”, SR2 powers up

    - Display shows

    - Battery 1 voltage 8.1V, 0 mAh

    - Battery 2 voltage 0.0V, 0 mAh


    If connect battery 2 to SR2 while powered on

    - Battery 1 voltage 8.1V, 0 mAh

    - Battery 2 voltage 0.0V, mAh numbers increases rapidly


    If I try to turn off with battery II connected, will not shut off


    If I disconnect both batteries, when I plug battery II in, unit powers up.


    Essentially SR2 Battery II not operating correctly.


    What do I do?


    Thanks

  • If you turn it on with both batteries connected all is fine? Regulated output is correct? Switching off also?

    There is nothing which can handle the situation different depending on WHEN you connect the battery

  • No.


    Battery connected to Battery 1 everything operates correctly.


    When battery connected to battery 2, SR2 comes on with switch off.


    When battery connected to battery 2, no ability to switch off


    When battery connected to battery 2, battery capacity consumption counter increments 10mAH/second.

  • Using PoweBox battery with MPX connector. Fairly certain not connected incorrectly. Battery seems to have failed and will not accept charge. Perhaps when battery failed it took out regulator #2???2mgY9X1


    Will send to Adam. Thx