I hope all is well. I'm building a new jet and I am using Futaba R7003s RXs instead of R7008s, as I had used on my previous builds with no issues. The issue I'm having is that the powerbox only seems to recognize the RXs when connected to the sbus.2 port, port 3. I'm also trying to use that port for the teleconverter, which is working fine, but according to the manual I should be using a sbus por. Port 1 should be sbus based on the mode I'm using. I've double checked the mode and I'm in mode 1 it to make sure, any thoughts?
The display does not show a solid RX led for the RXs unless I use port3, the sbus2 port. Let me know.