Royal RRS adding gyro

  • I've just acquired a model using a Royal RRS, an igyro 3e and running one Futaba 6014 rx. Even though this set up works I'd like to run twin rx's. Am I right in thinking that I will run the main controls from each rx into the Royal e.g. Aileron, elevator, flap, rudder (same channel order on each rx) and then run the matched outputs for twin ailerons, twin elevators and the single rudder into the igyro3e between the royal and the servos?


    Easiest thing to do would be to just leave it as it is, but this is a big jet and it seems silly not to use the redundant receiver option.


    Regards,
    Simon