Hi,
While connecting a GPS II to iGyro 3e for an enhanced gain control, I came up with the following questions :
1- How is the GPS II connected to iGyro 3e? Should I plug it directly to "Gain" channel on the iGyro?
2- Does the GPS II take its power from the iGyro?
3- Are Gain/Mode controls by transmitter possible after connecting GPS II?
The above information couldn't be found in both items' user manuals.
Hello,
1. MISC is the correct port
2. Yes
3. Of course: Connect the GPS, then adjust the plane with the gain new in the air. Once you have the correct gain value, you put it on a switch like before.
Yes. adjust with proportional dial, when done- put the values to a switch.
The Switch has then the optimum gain value. For example you fly and adjust the gyro to 56%. When all is fine with this gain, you make a switch with 0% to 56%
