Mercury ATT ASSIST STD on FM2 & ATT ASSIST ALL on FM3

  • Hello,


    I've put three flights on a new model running a Mercury and I'm noticing a tendency for the plane to fight me a little when in a bank and pulling up elevator through the turn. Almost as if the mode was set to ATT ASSIST ALL. I've verified and I'm flying in FM2 which is set to ATT ASSIST STD with ATT.ASSIST: off on Rudder. Any thoughts on what might be going on?


    The plane seems to be flying nicely and the gyro is setup nicely for landing except for the required, harder than average, pull on elevator to get the plane turned around. Any thoughts?


    Added Details:

    - Gain is set to 33%


    Thanks in advance.

  • Hello,


    you fly normal with Attitude STD (Standard). If you set it to Attitude ALL, of course it´s fighiting in the turns.

    If you feel the plane is softer, reduce the Expo values by 10%.

  • I have it set to Att.Std, but it feels like it's set to Att.All, that is my whole point. Are you suggesting I reduce expo in order to increase the throw closer to the center of the stick? Do I do this just for elevator or both ail and ele?