PowerBUS channels 17 and 18

  • Quick question: channels 17 and 18 on the PBUS are referred to as "switched channels", i.e., non proportional. Does this mean that if I operate the flaps via a 3-way switch those would be the channels to use?

    Or does it mean that they shall be used with functions operated by a 2-way switch, like the landing gear for example.

    This is not clear to me and during my previous attempt at using the PBUS I had issues with the flaps (which I assigned to regular channels, i.e., not CH17 and CH18). I hope that was the issue.

    Thank you,