PB Core Update

  • Update History:


    23.06.2019


    Linux Application V1.4

    Transceiver      V1.5

    Stickcontroller V1.3

    • Telemetry menu function (makes receiver and P²-Bus sensor parameters adjustable)
    • Address shifting for sensors if more than one of the same sensor is connected to the P²-Bus
    • Buttons with toggle/momentary option
    • Virtual switches
    • Servo Cut off function
    • Timer setup now direct in the widgets (old timer widgets have to be renewed by user)
    • Separate Timer Stop function
    • Export of single models to a USB memory stick
    • Servo list sorted by functions
    • New servos are created with 50% throw to avoid jamming servos in new planes
    • some bug fixes which had minor effects
  • Update History:


    09.09.2019


    Linux Application V1.5

    Transceiver      V1.8

    Stickcontroller V1.3


    • 12 Flightmodes implemented with priority control and fade-in functionality
    • Trim Bugfixing (check your trims in the model - they may have changed slightly!)
      • for example Trim 100% + Stick 100% is 200% now
      • Left and right trim correction
      • Trimposition shown in the graphics
    • Input can be set to -100% now
    • Trim clicks sounds with more volume
    • Note widget for personal text notes
    • endless screen lock option
    • Minor bugfixing (clock, text issues...)
    • Added a new Demo model which shows a simple flightmode usage


    IMPORTANT: Copy the files with the Terminal to your USB stick. The update process is the same as the last time, but there is one issue which is fixed with this update but you have to take care this time:


    WARNING: If you start the update and the radio asks you to turn off, don´t turn off at once. Wait at least 20 seconds before you turn off. This time is needed to copy all files correctly.

    If you don´t wait this time the update may crash your radio!!!

  • Update History:


    23.01.2020


    Linux Application V1.65

    Transceiver      V1.10

    Stickcontroller V1.3


    • Voice output for telemetry values, flight modes and free text
    • Receiver firmware update from the radio, including recovery functionality
    • File manager
    • Autoshutdown of the Linux System when the batteries become empty
    • *.wav file player in the file manager
    • Delay time in the setup bugfixed
    • Direct switching position can be selected for mixers
    • Core software update speed increased significant
    • Update safety increased, Rescue methods implemented
    • Several processes optimized in the background and bugfixed



    Follow this update instructions properly:

    Beachten Sie genau die Update Anweisungen:


    Core Update Information

  • Update History:


    02.03.2020


    Linux Application V1.70

    Transceiver      V1.10

    Stickcontroller V1.3


    • Telemetry logging fully implemented (Webportal for data viewing is in process)
    • Sensor/Value names are stored in model files, and are visible without any turned-on receiver at start
    • Button „Cancel“ in Servoconfig menu does not block the GUI anymore
    • Receiver menu is now available in the Binding Menu, just press the receiver picture
    • MIN/MAX widget values from the LQI data corrected
    • Corestart script version info visible
    • Trims and buttons as trim controls in the Functions menu are detected now in one click
    • Hysteresis values in the Voice Alarms menu for linear sources are fixed to be not slipping down to zero


    You don´t need to install the voice files if you did it already with 1.65!

    Sie müssen keine Sprachdateien installieren wenn Sie das schon mit 1.65 gemacht haben!


    Follow this update instructions properly:

    Beachten Sie genau die Update Anweisungen:


    Core Update Information


    ________________________________________________________________

  • Update History:


    21.04.2020


    Linux Application V1.80

    Transceiver      V1.14

    Stickcontroller V1.3


    • Vario sounds implemented
    • Advanced volume control for different sounds
    • Volume control with linear inputs
    • Voice queue implemented
    • Up to 32 voices possible now
    • Telemetry alarms will switch the main page to the widget where the alarm is
    • Alarms have a memory now and the blinking alarm symbol shows where the alarm occured
    • Telemetry units for Volt, Ampere and mAh are spoken now
    • Sensor menu control works smooth now
    • PWM output can be switched to P²-BUS for use with external vario systems


    You don´t need to install the voice files if you did it already with 1.65 or 1.70!

    Sie müssen keine Sprachdateien installieren wenn Sie das schon mit 1.65 oder 1.70 gemacht haben!


    Follow this update instructions properly:

    Beachten Sie genau die Update Anweisungen:


    Core Update Information

  • Update History:


    11.05.2020


    Linux Application V1.85

    Transceiver      V1.15

    Stickcontroller V1.3


    • Voice list modified to have a better overlook of the messages
    • Timer Voice Alarm
    • Bigger notes widget
    • Improved keyboard function
    • Bugfixed toggle switches
    • Bugfixed model loading without receiver binding



    You don´t need to install the voice files if you did it already with 1.65 to 1.80!

    Sie müssen keine Sprachdateien installieren wenn Sie das schon mit 1.65 bis1.80 gemacht haben!


    Follow this update instructions properly:

    Beachten Sie genau die Update Anweisungen:


    Core Update Information

  • 15.07.2020


    Linux Application V1.95

    Transceiver      V1.21

    Stickcontroller V1.4


    • Servo curves fully implemented
    • Rename, create and delete model folders
    • Add model pictures, size 215x100, *.jpg, *.gif or *.png formats
    • Reset of the model time
    • Filemanager allows to delete empty folders
    • Filemanager allows to copy complete folders to USB
    • Core antenna and powerdata is added to the logfiles
    • M-Link software fully implemented (needs M-Link hardware)



    You don´t need to install the voice files if you did it already with 1.65 to 1.85!

    Sie müssen keine Sprachdateien installieren wenn Sie das schon mit 1.65 bis1.85 gemacht haben!


    Follow this update instructions properly:

    Beachten Sie genau die Update Anweisungen:


    Core Update Information

  • 10.09.2020


    Linux Application V2.00

    Transceiver           V1.21

    Stickcontroller V1.4


    • Wifi functionality implemented
    • Portal Login prepared
    • Widget alarms with voice
    • Status alarms implemented
    • Timer short voice call outs added
    • Servocurve points changed from 9 to 17
    • Screenshot function implemented ( Press Lock button and > button simultanously)
    • Timer interval voice improved
    • Image viewer will scale images keeping the aspect ratio
    • Servocurve pointer added
    • Telemetry logger bugfixed
    • Vario beeps are smoother
    • Voice message queue improved
    • Internal processes optimized reducing computer load


    You don´t need to install the voice files if you did it already with 1.65 to 1.85!

    Sie müssen keine Sprachdateien installieren wenn Sie das schon mit 1.65 bis1.85 gemacht haben!


    Follow this update instructions properly:

    Beachten Sie genau die Update Anweisungen:


    Core Update Information