Is anyone using a Futaba 14SG with the 3xtra. I can setup the gains on the transmitter using a slider, no problem but I would like to use a 3 position switch. I found one way doing so using the Function menu and choosing the Aux1 selection and channel 7 (my choice) then using the end points to set the gain positions. The only problem using the Aux1 technique is I can't pick the switch position, the center position is always the off position but if it is safe using this setup I will live with it. I have tried using the Gyro menu selection in the Norm mode and don't seem to get things setup right, it is confusing and I can't find a internet thread explaining it as the manual is useless.