PBS-RPM sensor setup

  • I'm trying to setup the telemetry sensors in my plane, I'm using the Royal SRS with a PBR-9 and PBR-26 receiver I have installed 2 PBS-250 temp sensors, 2 PBS-RPM sensors and a PBS-P16 pressure sensor. My problem is that every time I connect the second RPM sensor the first one disappears from my telemetry display. I have checked the polarity and and integrity of my extensions several times, even bypassing them with the same results. Also reset the sensor using the terminal program to the default PB setting.and last question is what settings do I need to set the RPM sensor to for a dual ignition inline twin 0X, 1X, 2X Please let me know if I am missing something. I should mention this is on my Core system


    Thanks Wayne

  • after rereading the manual and some trial and error I was able to get the second RPM sensor working by bring up the first rpm sensor in the P2 bus display then clicking Addr button it scans and displayed the second sensor.