i have 2 x Futaba 7008SB receivers i want to connect to a Mercury Powerbox. Usually in a single RX system, i would have the receiver battery connected to port 8. If i set the RX port to SBUS configuration is it ok to use a 3 way splitter so i can still power the receiver, and send a signal to the Mercury RX inputs. If so do i have to use a seperate battery for each receiver as well, to keep electrical isolation between RX1 and RX2.? The manual doesn't have any recommended wiring diagrams.
do not connect any battery to the receivers - the receivers are powered from the Mercury!