In the manuel is written that if you wish telemetri. you have to use TM 1000 and you connect the tree-pin Tele output of the powerbox to the data input of the TM 1000. And connect the Four pin tele output of the powerbox to X-bus input of the TM-1000.
My Problem is that normally I use the X-bus input of the TM-1000 for my Spektrum GPS.
So how could i connect my Spektrum GPS when I use the TM-1000 and Mercury SRS when the X-bus have to be connected to the Mercury SRS?
Best regards Helge