Gyro setting Charac Ulta Hard Hard, Normal or Soft etc:

Helge Larsen · Jan 13th 2021

Hi It is my first Power box Mercury and I could not find anyting in the manual about Gyro setting Charac.

It could see that factury setting is hard, but what is the best way to use and what does it mean? I think it is a kind of Expo on the gyro funktion?

I have to use the powerbox in a Jet so is it better with the normal setting?

Another question. My Jet is a Pilor RC Predator with kingtech 210 Turbine and is it best to use the recommed Fligt mode Configuration from the manuel Fm 1 Off FM 2 Att Assist Std. FM 3 Att Assist All? Or is there better configurations for a Jet like mine?

I have no Vector trust but maybe later.

Best regards Helge

Richard Deutsch · Jan 13th 2021

Hello,

At page 12 here it is described: https://www.powerbox-systems.c…/3610_iGyro-SAT_en_01.pdf

Yes- you are right it´s missing in the Mercury manual.

I would recommend to use the Setup assistent to adjust the gyro. Dial in the gain in the flight with the Testfly assistant. For this plane you have then the best setup from where you can optimize it for your special needs.

Helge Larsen · Jan 13th 2021

Thanks for answer Richard. But what is the best to start with. Normal or Hard?

Best regards Helge

Richard Deutsch · Jan 13th 2021

Hello,

the assistant sets it to hard, which is the best setting for most planes

Share