Is it ok to hook up a 10A BEC to a servo output on the Competition? I'm powering the Competition with 2S Lipo's and setting the BEC to 6.0 volts to power a JP gear controller that can only handle 6.0 volts. They are the smallest electric gear that JP makes(going in a Mini Avanti)so they probably wouldn't pull more than two to three amps for a second or two when at the stops. Also wondering if hooking up a Xicoy (https://www.xicoy.com/catalog/…_info.php?products_id=293) brake controller to the same BEC output would be ok? The gear and the brakes should never be drawing max current at the same time. Thanks.