Posts by Scottm01

    Hi,

    I'm using Hitec TX and don't have SBUS capability. I am setting up a 40% with 3 servos on each aileron and rudder and 2 on each elevator half. I have Hitec 7950TH installed and they are programmed via PC and match perfectly so no need in any match functions.


    Will an Evolution set to 7.4v be good enough to cope with this amount of servos?


    I thought it would as it still has the same 2x20a regulators installed like the pro and comp but has the ability to plug all 3 servos into powerbox only using 1 RX channel unlike the pro or comp which would require using 2 channels or Y lead. Just don't want to buy Evolution if it won't be able to handle all them servos.


    Thanks in advance,

    Matt.

    Hi,

    I have a model that requires 3 Servos per aileron and Rudder. I have a Competition, will I be able to set it up?

    i was thinking having 1 servo in say no.4 and the other 2 in "A" matched to no.4. Would that be possible?


    I own an Hitec Aurora 9 and as such don't have a S-BUS receiver option usable for such an application which if my understanding is correct will not allow me to use any of the SRS PB's as they are S-BUS only.


    Would love to know a way to do this if possible.

    Thanks in advance,

    Matthew.

    Hi, I was wondering if there is any update on my Powerboxes I sent. Would like to know if they have arrived at least and any information on pricing and what not. Looking to buy some cabling and other parts for my plane and just looking to see what my budget will be after the powerboxes have been fixed.


    Thanks in advance,

    Matthew.

    When installing my PB Competition I created my own length patch leads and did not notice that one of them was wired with reversed polarity. This resulted in the Competition not turning on but smoked and both regulators are damaged. I thought it was the battery leads I had made so double checked them and they were correct. So went and tested it on my Evolution and blew that too. So now I have a PB Evolution and Competition both with damaged Regulators.


    Are you able to fix them and if so how much for each individual PB? With the current world situation what would be the rough estimated turn around be?


    I do not know the Software version of the powerboxes and I am using Hitec RX/TX however for the forum post I have selected the first options as Hitec was not listed.


    Thanks in advance,

    Matthew.