Posts by Buzz

    Hello RIchard

    Is it possible to use virtual switches for dual rates?


    I have my IMAC model with 60% aileron throw for flying all maneuvers. I would like to use a virtual switch to change the rate of the aileron to 100% when activated.

    Virtual "Snap Switch":

    I have a made full aileron AND full rudder as a virtual switch. "Snap Switch" But there is no way I can see to use this virtual switch to change the dual rates.

    I have done this in the Functions menu, but it acts as an ON/OFF switch not an ON/OFF/ON switch.

    It means this Function moves the end point of the ailerons from 100% left and when the virtual switch is activated, it moves to 100% right.

    Like putting the ailerons on a 2 position switch. Which does not work.

    Thanks for your assistance.



    Hi Richard

    Is it possible to have more than one Flight Mode allocated to the Throttle?


    - FM 1 low Throttle

    - FM 2 mid Throttle

    - FM 3 high Throttle.

    I can only get the Throttle to switch from Standard to FM 1.

    I can select the Throttle as as switch for FM2, but it will not activate the Flight Mode.

    I have moved the points (Red, Orange, Green) to the positions I want the Throttle to activation, but it does not work.