Posts by aerojet

    Hello Richard,


    My problem is the following:
    I have control of the gyro on a three-position switch FM 1/2/3 Channel 9
    But when you have a slider or knob to adjust the gain not worry Channel 10
    When the configuration is finished I turn on with the switch is ok, but not gain adjustment by moving the knob ??


    Ds-16 Version 3.02
    PBox Royal V09 Mode Udi


    Best Regards
    Mikaël

    Hello Richard,


    Everything is ok now thanks to your help :D .
    The telemetry works in UDI mode 2 Rsat,
    but also in EX mode with 3 Rsat.
    One thing to clarify JetiBox not used for visualization of information! you must select the parameters in the sensor menu to display on the screen of the radio.
    I also made a tutorial for my friends to quickly set up their radio with the powerbox Srs in UDI mode and am currently doing the same for the EX mode.


    Regards
    Mikaël

    Hello,


    Is there a solution to pass into the box without IDU returned to the factory?
    With the USB cable supplied with the box?



    Regards
    Mikaël

    Hello Richard,


    So after tests here are photos nothing works in telemetry in UDI.
    As telemetry mode is not changed in the powerbox I can not go in UDI.
    The only solution is to put 2 Rsat for the reception 1 in normal mode and 2 in clone mode, then 3 for telemetry.
    Telemetry or sacrificing the powerbox to avoid an installation with 3 RSAT.







    Regards
    Mikaël



    Ok,


    So the configuration is not the same?
    Because in the Royal UDI and not EX
    The only possibility in the competition is Ex Mode


    Regards
    Mikaël

    Thanks Richard,


    Udi except the telemetry on my radio displays Ex Only because there is no choice in the powerbox choose IDUs.
    unless there is a new software version other than the V20?


    Regards
    Mikaël

    Hello Richard,
    Thank You Richard you for the speed of response :D


    If I use a R9 and Rsat Mode Ex how to configure?
    I have the telemetry?
    There he was a receiver in clone mode?
    What settings should I exactly for optimal service.



    Best Regards
    Mikaël

    Hello,
    I want to know when the Ex Version is used must be put 3 x RSAT?


    Which solution is best?
    PPM or EX
    If I take the solution to a R9 receiver and a satellite RSAT, which configuration is best?


    Best Regards
    Mikaël


    DS 16 Ver 3.0
    R9 Ver 3.22
    Rsat Ver 3.22
    Competition SRS V20